Damocles Ruin 2 Story 9x9 Base
Damocles Ruin 2 Story 9x9 Base
Damocles Ruin 2 Story 9x9 Base
Damocles Ruin 2 Story 9x9 Base
Damocles Ruin 2 Story 9x9 Base
Damocles Ruin 2 Story 9x9 Base
Damocles Ruin 2 Story 9x9 Base
Damocles Ruin 2 Story 9x9 Base
Damocles Ruin 2 Story 9x9 Base
Damocles Ruin 2 Story 9x9 Base

Damocles Ruin 2 Story 9x9 Base

Regular price
$26.49
Sale price
$26.49
Unit price
per 
Shipping calculated at checkout.

Ruins terrain, with 5 inch high 1st floor walls and 3 inch high 2nd floor walls. This building has a 9 inch x 9 inch base, with a 6 inch x 6 inch 2nd floor.

Perfect for Warhammer 40k and other tabletop games. The goal of this terrain set is to offer reasonable prices for functional terrain that goes well with the themes found in the Warhammer 40k universe. Checkout the other offerings for gothic ruins in the Damocles terrain set!

Buildings are printed with a random assortment of sides as shown in pictures for a wide variety of looks. First floors are solid while 2nd and 3rd floors are printed with windows following Warhammer 40k terrain rules for visibility.

Building comes in several pieces including:
-Floor+Corner Pillars
-Walls
-Floor Supports (for 2 story and above buildings)

Pieces can be glued together (recommended) or left loose.

Model can be 3D printed in PLA.

Scale is suitable for 28 mm - 32 mm tabletop games such as Dungeons and Dragons (DnD), Pathfinder, and Warhammer, but does vary in size depending on designer. Please use the references provided in the photos shown with either 1 inch grids, D20, or 32 mm miniatures for scale.

This model set comes unpainted. We usually use a grey/silver color (unless colors are listed as an option), but might use an alternative that may be closer to the base color of a particular piece, such as light blue for ice terrain, green for plants, brown for wood, etc. Regardless of the 3D printed color, you can prime and paint to whatever end color you want.

Backgrounds or game mats not included.

Source models are copyright Touret William, provided as an officially licensed seller.

At Kopper Orc 3D, we 3D print terrain and miniatures for an assortment of tabletop and role playing games at a quality level that makes you forget it's even 3D printed! Large pieces of terrain are printed at 0.2 or 0.15 mm, with smaller pieces at 0.1 mm with PLA. For reference, as your layer lines get smaller, the longer it takes to print, but the higher amount of detail is captured. For miniatures, we don't stop there! We go down to 0.07 mm to minimize layer lines and give you the smoothest looking minis using this material. We also offer a resin option for those looking for the maximum possible level of detail and cleanest look. This is offered for miniatures only. Resin for reference is cured with UV light.

PLA options have had any supports already removed, with minimal or no blemishes left. Areas with overhangs may require additional clean up. Terrain with larger print layers will be covered up after priming with paint. Miniatures should have barely, if any noticeable layer lines due to the extremely low resolution used.